Trueline coping system provides a cost
effective and easily installed finish to
No Visible fixing
Installation is quick, not requiring
any specialist tools
The fixing strap allows venting to
the top of the wall
Flexible as they can be designed to
fit most situations.
The copings can be polyester powder
coated to a colour of your choice.
The 3mm aluminium retaining straps must
be securely fixed to the top of the wall
at specified centres. A high strength
gap filling adhesive is applied to the
top of the retaining clips. The coping
is then firmly pressed down over the
retaining straps and clicked into place.
The copings are then joined together
with a joint clip and silicon sealed in
place on site. Ensure when fixing that a
gap of 3-6mm is left between lengths, in
a continuous run, to allow for the
thermal expansion of aluminium (23 x
110-6mm per °C)
Aluminium should be protected from
materials which may cause electrolytic
corrosion, such as cement based
Aluminium is a suitable material for use
within a lightning protection system.